How do I point to my boot drive in the BIOS?
Step 1: Enter your computer’s BIOS setup utility for Changing the System Boot Order. Step 2: Navigate to the boot order menu in the BIOS. Step 3: Change the boot order. Step 4: Save your changes.
How do I choose which drive to boot with Windows 10?
Hold down the Shift key and restart the PC. It would help if you got the Windows 10 boot options screen. One of the choices is “Choose a different operating system”, which allows you to choose a different installation of Windows.
How to access BIOS?
To access the BIOS on a Windows PC, you need to press the BIOS key set by your manufacturer, which can be F10, F2, F12, F1, or DEL. If your PC goes through the self-test boot too quickly, you can also enter the BIOS through the advanced recovery settings of the Windows 10 start menu.
How to enable SSD in BIOS?
Solution 2: Configure the SSD settings in the BIOS. Restart your computer and press the F2 key after the first screen. Press the Enter key to open Config. Select Serial ATA and press Enter. Then you will see SATA Controller Mode Option. Save your changes and restart your computer to enter the BIOS.
How do I change the boot drive without BIOS?
Installing each operating system on a separate drive allows you to switch between the two by selecting a different purpose each time you boot without entering the BIOS. If you use the storage drive, you can use the Windows Boot Manager menu to choose the operating system when you start your computer without entering the BIOS.
What is UEFI Boot Mode?
UEFI stands for Unified Extensible Firmware Interface. UEFI provides security such as “Secure Boot”, which prevents the computer from booting from unauthorized/unsigned applications. UEFI has discrete driver support, while BIOS has disk support stored in the ROM, so updating BIOS firmware is difficult.
How do I change the boot menu in Windows 10?
Use these steps to change the boot menu timeout on Windows 10: Open Settings. Click System. Click About. Click the Advanced System Settings option in the “Related Settings” section. Click the Advanced tab. In the “Startup and Recovery” section, click the Settings button.
How do I get to the boot menu in Windows 10?
I – Hold down the Shift key and restart. This is the easiest way to access Windows 10’s boot options. All you need to do is hold down the Shift key on your keyboard and restart your PC. Open the Start menu and click the “Power” button to open power options.
How do I change boot options?
The steps are as follows: Restart or turn on the computer. Press the key or keys to enter the Setup program. As a reminder, the most commonly used key to join the Setup program is F1. Choose the menu option or options to display the boot order. Set the boot order. Save the changes and exit the Setup program.
How do I get to the BIOS setup?
To enter the BIOS on a Windows 10 PC, Navigate to Settings. You can get there by clicking the gear icon in the Start menu. Select Update & Security. Select Restore from the left menu. Click Restart Now under Advanced Startup. Click Troubleshoot. Click Advanced options. Select UEFI firmware settings. Click Restart.
How do I reset my BIOS to default?
Reset BIOS to Default Settings (BIOS). Enter BIOS Setup Utility. See Accessing BIOS. Press the F9 key to load the factory settings automatically. Confirm the changes by highlighting OK and then pressing Enter. To save the changes and exit the BIOS Setup utility, press F10.
Why is my SSD not showing up in the BIOS?
Make sure your SATA cables are properly connected to the SATA port connection. The BIOS will not detect an SSD if the data cable is damaged or the link is incorrect. The easiest way to test a line is to replace it with another string. If the problem persists, the line is not the cause of the problem.
How do I make my SSD the primary boot drive?
Set your controller to AHCI or ACPI if your BIOS supports it. If your BIOS supports it, set the SSD to number one in the hard drive priority. Then go to the different boot order options and create the DVD drive number one there. Reboot and follow the instructions in the operating system settings.
How do I change BIOS boot options?
Changing the UEFI Boot Order From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > UEFI Boot Order and press Enter. Use the arrow keys to navigate within the boot order list. Press the + key to move an item up in the boot list.
How do I select the boot device at boot?
From Windows, hold down the Shift key and click the “Restart” option in the Start menu or on the login screen. Your PC will reboot into the boot options menu. Select the “Use a device” option on this screen, and choose a device to boot from, such as a USB drive, DVD, or network boot.
How do I change the boot order in Windows 10 BIOS?
Once the computer boots up, go to the firmware settings. Switch to the Startup tab. Here you will see boot priority with a list of connected hard drives, CD/DVD-ROM, and any USB drive. You can change the order by using the arrow keys or + & – on your keyboard. Save and close.